TDK Lambda EMS 13-150-2-D Power Supply

The EMS 13-150-2-D Power Supply has an automatic high temperature protection that is provided by a thermostat mounted on the heat sink. If the temperature of the heat sink reaches the maximum permitted temperature, the instrument is switched off to prevent harm. An automatic restart circuit is started as soon as it is safe to reestablish the operating temperature levels.

The RSTL function incorporates all the highlights of a standard instrument, but also has Remote Sense. The installation of the RSTL might require an extra 1.75” to the height of the power supply. The board is planned for remote workstation control, functionally duplicating the controls on the front board of the control supply. These controls select the modifying levels (Voltage and Current) and offer metering of the supply’s output. When set in the remote mode, the RSTL disables the front board controls (the meters still read) and asserts control of the power supply. RSTL may be not presently accessible in CE models.

The EMS 13-150-2-D is air cooled with air entering through the front and sides and exiting through the back. An indoor regulator protects the unit from excessive ambient temperature as well as insufficient forced air cooling. This model has 0 to 13 V of DC, a current of 0 to 150 A, and 220 V Input. Except for test purposes, this power supply should not be operated with covers uprooted.

If you are interested in this model and you want to read mora about its specifications, highlights and special options, you can read its manual, which is available on the ApexWaves.com website.